login   |    register
Platz [ MORE REVIEWS ] [ WEBSITE ] [ NEW STORIES ]

Built Review
1144
N1K2-J Shiden-Kai
Shiden-Kai N1K2-J 'George' Late Type
  • move

by: Frederick Boucher [ JPTRR ]


Originally published on:
AeroScale

Introduction
Shiden-Kai N1K2-J 'George' Late Type was released by Platz in 2006. This iteration was released in 2018 as kit PDR-2, and the molds are none the worse for wear.

Platz is known for high quality 1/144 aircraft of the Second World War and Cold War, automobile kits, and for models of the Anime/Manga/Gundam genre.

When 1/144 aircraft began to debut in the early 1980's, I bought some Revell Japanese twin-engine planes. One look and I returned them. Though I knew this scale has been making strides and is comparable with larger scales, I had no interest in 1/144. This model has changing my mind!

History
    The Kawanishi N1K Kyōfū (Strong Wind) is a Dai-Nippon Teikoku Kaigun Kōkū tai (Imperial Japanese Navy Air Service) floatplane fighter. The Kawanishi N1K-J Shiden (Violet Lightning, codename "George" by the Allies) was a land-based version of the N1K. The Shiden-Kai, a modification of Shiden, possessed heavy armament as well as surprisingly good maneuverability. The late version was characterized by a smaller vertical stabilizer.


In The Box
The kit includes two N1K2-J Shiden-Kai model kits. This is a simple kit with few parts. Each "George" is held on one sprue, except for the canopy. Including the "greenhouse" there are 30 parts. Molding is marvelous with crisp fine molding, recessed panel lines, and finely sized parts. Visible ejector marks, seam lines, sink areas, and flash are absent. The surface is smooth. Colorful marking for N1K2-Js are provided on the big silk-screen printed decal sheet by Cartograf, including canopy framing.

Assembly is conventional with left/right fuselage halves with a one-piece canopy, a bottom wing and left/right top wings, a cowl with engine insert and propeller, separate horizontal stabilizers, three-piece cockpit, landing gear (struts, wheels, gear doors), tail wheel, and a four-piece drop tank. The model is about 65mm in length.

Note this is the late type Shiden-Kai. You can see in the photos that the fuselage has a guide molding into it for cutting away the empennage, presumable for an 'early' aircraft.

Detail
Perhaps the most impressive detail are the thin parts. Finely engraved panel lines detail the airframe. Cockpit detail is simple: seat, instrument panel, stick. The seat sides are remarkably thin. Inside the cowl is a simple face of a 1,990 hp (1,480 kW) Nakajima Homare NK9H 21 eighteen-cylinder radial engine. The main landing gear struts have good contours.

For those of us who do not want to risk painting the fine canopy frames, two decals are provided for the framing. Great idea although one must consider that the ink may not match one's airframe paint.

Assembly
Fit is very good. I assembled the airframe with tube glue applied with a toothpick. The parts a left no gaps; later I followed up with liquid glue to ensure a tight weld. The wings popped into the fuselage nicely. One model had a slight step at the bottom wing-fuselage junction. A dab of liquid glue and clamping filled it.

I highly recommend magnifiers and precise tweezers (look up those by Wilder reviewed here on KitMaker Network) for handling the parts. Flush-cut sprue nippers are important, too. A minuscule burr will be a big problem on some parts.

The main gear assemblies were most challenging. The struts attach to the gear covers with two very fine pins and holes (about the size of my #80 drill bits [.0135 inch]). The pin/hole size of the wheels are a but bigger.

Tiny as it is, I notice there is a notch at the leading edge of the stabilizer-fuselage attachment on one of the models.

Assembly is straightforward but I recommend good lighting, magnification, and good tweezers.

Decals and Instructions
Platz instructions are clearly illustrated and smartly arranged. The parts are keyed to their sprue number and to color codes.

Look at that decal sheet! You have five choices for these two models:
    Prototype No. 6 Naval Air Technical Arsenal 1944, Yokosuka
    701st Fighter Squadron, 343rd Naval Flying Group, S/L Oshibuti, April 1945, Matsuyama Air Base
    407th Fighter Squadron, 343rd Naval Flying Group, S/L Hayashi, April 1945, Matsuyama Air Base
    301st Fighter Squadron, 343rd Naval Flying Group, August 1945, Omura Air Base
    No. 5243, Kawanishi Factory
The decals are by Cartograf, which is synonymous with high-quality.

Recall that the models have canopy frame decals? Platz does not include such a decals for the Yokosuka Naval Air Technical Arsenal prototype; you are on your own painting those orange-yellow frames.

Conclusion
Platz released a gem with Shiden-Kai N1K2-J 'George' Late Type. For its age the molds have held up well and the detail and molding are excellent, offering fine crisp molding and detail, with excellent fit. Five airframe decal options are provided, including canopy frame decals (except for the prototype aircraft).

Assembly is simple and fit is about 98% excellent - and that plus or minus 2% could be a flaw in your reviewer, not the model.

"George" is a favorite of Imperial Japanese Navy Air Force modelers and Platz is a favorite of 1/144 modelers. Now that I have assembled one of these models, I understand why. These are marvelous kits and I happily recommend them.
SUMMARY
Highs: Fine crisp molding and detail, with excellent fit. Five airframe decal options, including canopy frame decals.
Lows: No canopy frame decals for the orange-yellow flight test livery.
Verdict: Platz is a favorite of 1/144 modelers and now that I have assembled one of these models, I understand why. These are marvelous kits and I happily recommend them.
  Scale: 1:144
  Mfg. ID: PDR-2
  Related Link: 
  PUBLISHED: Jan 18, 2020
  NATIONALITY: Japan / 日本
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.03%
  MAKER/PUBLISHER: 88.47%

Our Thanks to Platz!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.

View This Item  |  View Vendor Homepage  |  More Reviews  

Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
About Frederick Boucher (JPTRR)
FROM: TENNESSEE, UNITED STATES

I'm a professional pilot with a degree in art. My first model was an AMT semi dump truck. Then Monogram's Lunar Lander right after the lunar landing. Next, Revell's 1/32 Bf-109G...cried havoc and released the dogs of modeling! My interests--if built before 1900, or after 1955, then I proba...

Copyright 2020 text by Frederick Boucher [ JPTRR ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of Armorama. All rights reserved.



Comments

   

What's Your Opinion?


Photos
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move